Re: vCOPS 5.6 and MS System Center
Thank you. Is there a document that describes this integration? Matrix
View ArticleRe: VM Global Settings in vcops 5.6
my 56 vapp has admin tab which is where you can create uses, support items, run audit reports and of course global settings. Maybe a license issue, but the custom ui should be fully featured if lic key...
View ArticleRe: VMWare Essentials Kit Backup possibilities?
Note: Discussion successfully moved from VMware ESXi 5 to Backup & Recovery
View ArticleRe: verify NIC teaming config
It looks like will work - also to point you will not be able to vmotion with the free license -
View ArticleVcentre 4.0 sql upgrade before Vcentre 5.1 upgrade Problem
Hi all hopefully someone will have seen this but i an struggling to sort this one. Just moved SQL from 2005 express 32bit to sql 2008 r2 express 64bit due to requirement for 5.1 upgrade. I have moved...
View ArticleRe: Max SQLFire Cluster in real practice
It's an useful infomation to me if the overhead will not higher than double normally (600G->1.1Tera). The actual sizing will be estimated further after finalizing schema and index tables.Besides,...
View ArticleRe: Vcentre 4.0 sql upgrade before Vcentre 5.1 upgrade Problem
Also dsn tests successfully Microsoft SQL Server Native Client Version 10.50.2500Running connectivity tests...Attempting connectionConnection establishedVerifying option settingsDisconnecting from...
View Articleunable to open Vsphere web client
unable to open Vsphere web client, getting Certificate error - not trusted "based on the current configuration the ssl certificate of the authentication server was not trusted" I was following...
View ArticleRe: Proper NTP configuration
"...does the NTP client service have to be started or not?..." Yes, it has to be started. "...do we just put in NTP servers..." This is necessary too, ntp-client need to know the source of accurate...
View ArticleRe: Orchestrator and VMware View PowerCLI
1. Can you provide the output of getResults().getXml()2. Try enumerating the items with something likefor (idx in rootObject ){ var item = rootObject [idx]; System.log(...
View ArticleRe: "Best" Practice with Configuring iSCSI with VNX and Cisco UCS
Andrew - Glad you got your problem resolved. I have not introduced a Cisco 4000 series switch into the mix but have used a Nexus 5k to connect a VNX to a Cisco UCS environment. What I have found is...
View ArticleHosts briefly disconnecting from vCenter
I have an issue where several hosts will briefly disconnect from vCenter (5.1), causing it to throw a host connection state alarm, but the hosts re-connect just as fast. This has been happening for a...
View ArticleRe: Riavvio agenti esx 4
In /etc/init.d puoi comunque vedere quali servizi sono disponibili.E con ps -ax puoi vedere se è in funzione.
View ArticleRe: Upgrade vCenter & ESXi to 5.1 .. License question ..
Tim, thx for info .. than I can upgrade ESXi and vCenter with the same license as you wrote .. Jozef
View ArticleRe: verify NIC teaming config
Thanks for your reply Weinstein. Sorry it was typo i was about to tell i will not be able to enable vmotion since it is free edition. I just want to ensure there is no congestion in the lan traffic and...
View ArticleRe: Unable to Ping from Host OS to Guest OS on VMWare Workstation-8
Thanks Lou for your response... ########### HOST OS (WIN 7) ##################################C:\Users\Mann>ipconfig/allWindows IP Configuration Host Name . . . . . . . . . . . . : Mann-PC...
View ArticleClik here to view.
Re: Short quick NAT question
Hi,very short and quick answer No, there can be multiple VMs using NAT. ( You use multiple PCs at home behind your router, that does NAT, too, right? )The pakets contain not only the IP adress, but...
View ArticleRe: 合併顯示問題Combined display issues
i want the values for SCSI0:0 in that file ^^ another question how can i change the file form like below .... A , B , C1 , 2 , 34 , 5 , 6 i want to transpose rows into columns like A , 1 , 4B , 2 ,...
View ArticleRe: vCO, vCD, and ways to respond to User Interaction to approval workflows
Hi!To get a direct link to the user interaction you can use the getAnswerUrl() and getInteracionUrl() of a workflowToken object. (see the "Send interaction" workflow in library/mail for an...
View ArticleRe: View Blast -changing default domain that is display at login
Thank you, i will check this out.
View Article