Quantcast
Channel: VMware Communities: Message List
Browsing all 246952 articles
Browse latest View live

Esxi5.0 to 5.1 Live Vmotion

Hi Guys, I have two Esxi host, one running 5.1 the other running 5.0 both R710 but the CPU models are different. and Unfortunately the one that is running 5.0 the CPU does not support AES-NI feature...

View Article


Re: datastore not accessible vsphere 4.0

Hi,    Please post the kernel logs once a rescan is initiated also do let me know the NAA id of the lun.

View Article


Re: Esxi5.0 to 5.1 Live Vmotion

Create a cluster if you didnt do already. Add both ESXi servers to it and enable EVC....

View Article

Re: invalid host after registering vmx file

Hi,    Few scenarios were in vm will show in inactive state is  After a vMotion or VMware DRS migrationAfter a VMware HA host failure occurs, or after the ESX host comes out of maintenance modeA...

View Article

Re: how to remove a vm from inventory in vcentre when the host is down

You need to disconnect the host from the cluster so the VMs will disappear. Then you can add VMs to the inventory from the Datastore. 

View Article


Re: datastore not accessible vsphere 4.0

Also let us know if there are any changes in zoning or on the storage level.

View Article

Re: how to remove a vm from inventory in vcentre when the host is down

Hi Mouhamah, yes tried that.  i was able to disconnect the host, but that didnt change the vm state - they were still "disconnected".  i was sure the host was disconnected, because i coudl then go...

View Article

Re: What does a snapshot of independent disks take?

Configuration file of a VM. For example, if you have 4 NICs on that VM before the snapshot and are removed later. When reverting back the snapshot, it will put back the initial configuration. This...

View Article


VMware Partner Portal

Hi all I think this is not the right portal to post this question, sorry for this but what to do i didn't get the right portal so...Actually i have an account in VMware partner portal.. I am certified...

View Article


Re: how can we know if esx with static ip is listen to DHCP server on nics?

thanks for the reply André >Do you see any entries in the guest's event logs regarding this issue?  What type of physical switch do you use? In case of a managed switch how  did you configure the...

View Article

Re: delay of 2 minutes when connecting to view desktop thru PCoIP

Hi,I am using only self signed certificate. It is being tested in the Intranet environment.Can the delay be due to this?Thanks in advance

View Article

Re: Esxi5.0 to 5.1 Live Vmotion

Thanks for the quick reply, I have a slight problem, 1 x R710 with nehalm CPU E5530 1 x R710 with westmere CPU E5620 How would u enable EVC for both u can only do one or the other feature set. SO I am...

View Article

Re: Info on Hyperthreading

Hi Andre, I have attached snaps of the HT status which is displayed on vSphere client.

View Article


Re: Info on Hyperthreading

BIOS settings has been verified on hardware side. All options regarding HT are set and verified by Dell.

View Article

Re: Esxi5.0 to 5.1 Live Vmotion

Check attached.

View Article


Re: Esxi5.0 to 5.1 Live Vmotion

Excellent thank you ver much for this helpfull info.

View Article

Re: Esxi5.0 to 5.1 Live Vmotion

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003212 Check L3 EVC Level, you should be fine.

View Article


Re: Esxi5.0 to 5.1 Live Vmotion

Thanks Mouhamad for your Help

View Article

Re: VMware Partner Portal

You need to contact certification@vmware.com in order to merge your mylearn account with your partner account.

View Article

Re: Esxi5.0 to 5.1 Live Vmotion

Error came up on vCenter while adding the Westmere host to the Cluster...

View Article
Browsing all 246952 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>